Traditional reinforced concrete for a fully made-to-measure pool, or a prefabricated shell for a quick installation: we guide you towards the solution that suits your land and your project.
A method proven for its strength and longevity, suited to every pool shape and to the constraints of each site in Tunisia.
A modern, practical solution, factory-made from composite materials reinforced with fibreglass and resin, for a neat finish.
| Traditional reinforced concrete | Prefabricated shell | |
|---|---|---|
| Construction | Built on site, from A to Z | Made in a factory, installed on site |
| Shapes | Every shape, fully made to measure | Available shapes, sizes and colours |
| Build time | Depends on the site | Shorter: about 10 days of work |
| Budget | Depends on the project | Generally lower than reinforced concrete |
| Interior surface | Choice of finish: mosaic, tiles, polished concrete… | Smooth, non-porous, soft to the touch |
| Waterproofing | 5-layer waterproof tanking | One-piece structure |
At RC Piscine, every pool is built in traditional reinforced concrete, a method proven for its strength and longevity. The steel reinforcement is sized according to the dimensions of the pool and the nature of the ground.
A specific concrete, formulated with a mix suited to the technical requirements of pools and underground tanks, is carefully placed to ensure the strength, durability and stability of the structure.
To guarantee optimal watertightness, a waterproof tanking made of 5 successive layers, applied by hand, protects the pool against water seepage. After the tanking, a finishing render reinforced with a mortar additive is applied to obtain an even, strong surface suited to laying the finish of your choice.
Whether you dream of a designer pool with straight lines or a unique free form, we turn your wishes into reality. Our solutions adapt to your needs and your budget, for a made-to-measure project that reflects your style.
Carefully proportioned and reinforced concrete, built to withstand water and earth pressure over time.
A wide range of sizes and shapes: linear, free-form, landscaped.
Mosaic, Bali stone, render, tiles or polished concrete.
Suitable for all ground, including seismic zones.
Setting out and excavation: the location, defined with you, takes into account the dimensions of the pool and the constraints of the site. The ground is dug to the slopes and levels required to provide a stable, durable base.
The sub-base is prepared and levelled to receive the concrete slab. This step ensures an even, stable foundation on which the whole pool rests.
Dense, high-quality steel reinforcement, made up of two layers of rebar mesh for the slab and the walls, is positioned precisely to ensure excellent mechanical strength and optimal solidity of the entire structure.
Supply and installation of a PN16 pressure PVC hydraulic network, specially suited to pools. Pipes and fittings are solvent-welded for excellent watertightness and optimal water circulation between the pool and the technical room.
The embedded fittings, essential for water circulation, are installed before the concrete is poured, as are the lighting floodlights.
A specific concrete mix is poured to form the reinforced concrete slab and walls, with particular attention to strength and compactness.
Five successive layers, applied by hand over all the walls and the slab. This process provides reinforced protection against seepage and lasting watertightness, suited to in-ground pools.
After the tanking, a finishing render reinforced with a mortar additive gives an even, strong surface suited to laying the finish of your choice.
Stone or marble coping with a non-slip finish, providing an attractive, safe and durable edge around the pool. The finish is chosen according to your taste and the technical requirements of the pool (tiles, mosaic or natural stone) for a smooth, pleasant surface that is easy to maintain.
Installation of the filtration equipment (pump and filter), then the water is set in circulation. Your pool is ready to welcome you, with clean, clear water.
The prefabricated shell pool is a modern, practical solution that offers quick installation and a neat finish. Made in a factory from composite materials reinforced with fibreglass and resin, it has a one-piece structure designed to provide strength, lightness and durability.
Its smooth, non-porous interior surface makes maintenance easier and limits the build-up of impurities and algae.
Available in different shapes, sizes and colours, the shell pool adapts to different outdoor spaces and lets you enjoy an attractive pool with a shorter build time than traditional reinforced concrete construction.
About 10 days of work for the installation, depending on site conditions.
Cost generally lower than that of a traditional reinforced concrete pool.
Factory manufacture ensuring a uniform, strong structure.
Limits the build-up of algae and impurities.
Simple cleaning and reduced routine upkeep.
Composite materials reinforced with fibreglass and resin.
Different shapes, sizes and finishes available.
Soft, pleasant interior surface.
Excavation of the ground to the dimensions and depth of the shell.
A levelled, compacted gravel bed is laid to ensure a stable foundation.
The shell is transported and installed using suitable lifting equipment.
Precise adjustment of the shell to ensure its alignment and levelness.
Installation of the PN16 pressure PVC pipes and connection of the equipment.
Gradual filling of the space around the shell with a suitable material, while the pool is filled with water.
Installation of the filtration, the pump and the water treatment equipment.
Laying the coping, landscaping the surroundings and finishing around the pool.
Checking the connections, hydraulic tests and starting the filtration system.
Tell us about your land: we advise you on the right solution and offer you a personalised quote.